2020 TAKEUCHI TL8 SKID LOADER KUBOTA V3307-CR TURBO-ONE OWNER MACHINE- 1418 METER HOURS- MAINTAINED UNIT-TRACKS ARE 50% OR GREATER-FRESH SERVICE WILL BE PREFORMED FOR NEW OWNER UPON PURCHASE- WE DELIVER ! SEE SPECS BELOW-
Operating Weight Standard Machine with Bucket
Canopy
Cab
Tipping Load
Rated Operating Capacity, SAE J818*
with opt. Counterweight
Operating Load at 50% of Tipping Load
Bucket Breakout Force
Lift Arm Breakout Force
Traction Force
Capacity SAE Heaped (Optional Bucket)
Cycle Time
Raise Full Load
Lower No Load
Dump Full Load
Curl No Load
*Operating capacity of compact track loaders is rated according
to SAE J818 at no more than 35% of the tipping load
8,455 lbs (3,835 kg)
8,631 lbs (3,915 kg)
6,020 lbs (2,731 kg)
2,105 lbs (955 kg)
2,323 lbs (1,054 kg)
3,010 lbs (1,365 kg)
6,856 lbs (3,110 kg)
6,709 lbs (3,100 kg)
9,127 lbs (4,140 kg)
14.0 cu ft (.040 m³)
4.0 Seconds
2.5 Seconds
2.5 Seconds
2.0 Seconds
ENGINE
Make / Model
Cylinders / Displacement
Horsepower
Rated Engine Speed
Maximum Torque
Engine Lubrication
Cooling System
Fuel Tank Capacity
Fuel Consumption, 65% of full load
Electrical System
Kubota / V3307-CR-Turbo
4 / 203 cu in (3.3 L)
74.3 hp (55.4 kW)
2,600 rpm
192 ft-lb @ 1,500 rpm (260 Nm)
11.2 qt (11.8 L)
14.8 qt (14.0 L)
19.8 gal (75.0 L)
2.69 gal / hr (10.2 L / hr)
12 volts / 60 amps
UNDERCARRIAGE
Track Drive Type
Parking Brake
Track Roller Type
Track Rollers
Track Width
Track Ground Contact Length
Ground Pressure
Maximum Travel Speed
Low
High
Hydrostatic Drive System w/ Double
Reduction Planetary Final Drive
Spring Applied, Hydraulically Released,
Multiple Wet Friction Disc
Large Outside Running, Permanently
Sealed Rollers w/ Material Face Seals
5 per side
15.7 in (400 mm)
Optional 12.6 in (320 mm)
54.7 in (1,390 mm)
Canopy 4.4 psi (30.2 kPa)
Cab 4.5 psi (30.8 kPa)
4.6 mph (7.4 km / hr)
6.8 mph (11.0 km / hr)
HYDRAULIC
Hydraulic Reservoir Capacity
Hydraulic System Capacity
Auxiliary Flow - Primary Circuit
Auxiliary Flow - Optional High Flow
Hydraulic System Pressure
10.3 gal
MoreLess
Limited Time Offer!
Selling Price -$34,750.00
Selling Price -
$34,750.00
2020 Takeuchi 4-in-1 Multi-Purpose Bucket 60” MD
Features may include
4-in-1 Multi-Purpose Bucket
- Heavy-duty hinges and pins to distribute load
- 1/2” Connect under pressure couplers for simplified hose connections
- Long floor design improves cutting edge visibility
- Constructed of high tensile steel for greater strength
- High Tensile steel side plates to support greater break out force
- Spherical bushings on cylinder ends (Heavy Duty)
- 1” x 6” cutting edge on front of clam and 3/4” x 6” high carbon edge on rear of clam (Heavy Duty)
- Bolt-on side cutters standard (Heavy Duty)
- Standard reversible bolt-on cutting edge standard on smooth buckets
- Weld-on shanks with heavy-duty 23 series side pin teeth standard on tooth buckets
- 1 Year Limited Warranty
- 2WD
- $34,750.00
- Flowery Branch, Georgia
- Pre-Owned
- In Stock
- R-30190
- 2020
- Takeuchi
- TL8
- XXXXXXXX200808718
- RED/GRAY
- KUBOTA
- 1,394
- 74
- 1418
- Diesel
- Available
- 2WD